フェアウェイゴルフ

言語(language):
  • マイページ
  • カートを見る
  • サイトマップ
  • ヘルプ

Evnroll Putters

Evnroll Putters
メーカー Evnroll
商品名 Evnroll Putters
価格

定価:$329.00

取得ポイント数:329P

商品説明

Overview

Evnroll Putters
イーブンロール パター EVNROLL PUTTERでボ−ルが集まります。。日本未発売です。

面白い実験

同じ太さの二本の棒を用意して(約30センチ)。2本の棒の左片方をくっつけて片方を少し離して(1センチ)平坦なテーブルの上におきます。其の上にゴルフボールを置きます。1センチの幅を少しづつ開くと、ボールは棒の間隔幅の広いほう右側へ動きます。ボールの重力が其の重さで逃げが起きる現象ですね。。
フェースの広い範囲で打っても1点にボールが集まるので、かなり有利な条件でパターをする事になります。

何が凄いのかというと。。科学的でここまで一生懸命にパターを考えている人が居るんだな〜と、感激しました。
下の図を見てください。パターロボットで各緒条件を固定しEVNROLLのフェースの在る無しでテストした結果なのです。
つまり、パターフェースの違いだけで下記の図ように異なるのです。



左が、普通のパター、右がEVNROLLです。
打つ場所が異なってもボールは真っ直ぐ行く事を証明しました。


ER1 Blade – a classic heel-toe weighted flange blade.
• CNC Milled in Carlsbad, California USA
• Head Material – 303 stainless steel
• Color – Silver satin finish
• Shaft Lengths & Head Weights– 35’@355g, 34”@370g, 33”@385g
• Face Loft – 2 degrees from the shaft
• Lie Angle – 71 degrees
• Stock Grip – Custom Winn ProX 1.18
• Length – Measured from center of leading edge
• Balance – 20 degrees toe down
• Shaft – FST stepless, .370” tip
• Shafting – Single bend mounted directly into the head

ER2 Mid Blade – a shorter and wider heel-toe weighted flange blade.
• CNC Milled in Carlsbad, California USA
• Head Material – 303 stainless steel
• Color – Silver satin finish
• Shaft Lengths & Head Weights– 35’@355g, 34”@370g, 33”@385g
• Face Loft – 2 degrees from the shaft
• Lie Angle – 71 degrees
• Stock Grip – Custom Winn ProX 1.18
• Length – Measured from center of leading edge
• Balance – 15 degrees toe down
• Shaft – FST stepless, .370” tip
• Shafting – Single bend mounted directly into the head

ER3 WingBlade – an extreme heel and toe weighted flare-back blade.
• CNC Milled in Carlsbad, California USA
• Head Material – 303 stainless steel
• Color – Silver satin finish
• Shaft Lengths & Head Weights– 35’@355g, 34”@370g, 33”@385g
• Face Loft – 2 degrees from the shaft
• Lie Angle – 70 degrees
• Stock Grip – Custom EVNROLL non-taper 1.2
• Length – Measured from center of leading edge to butt
• Balance – 30 degrees toe down
• Shaft – FST stepless, .370” tip
• Shafting – Single bend mounted directly into the head

ER5 Hatchback – a classic heel-toe weighted flange blade.
• CNC Milled in Carlsbad, California USA
• Head Material – 303 stainless steel
• Color – Silver satin finish
• Shaft Lengths & Head Weights– 35’@355g, 34”@370g, 33”@385g
• Face Loft – 2 degrees from the shaft
• Lie Angle – 71 degrees
• Stock Grip – Custom Winn ProX 1.18
• Length – Measured from center of leading edge
• Balance – 5 degrees toe down
• Shaft – FST stepless, .370” tip
• Shafting – Single bend mounted directly into the head

ER6 iRoll – a full mallet with a rear center weight
• CNC Milled in Carlsbad, California USA
• Head Material – Red anodized 6061 aluminum, 303 stainless steel rear weight
• Shaft Lengths & Head Weights– 35’@355g, 34”@370g, 33”@385g
• Face Loft – 2 degrees from the shaft
• Lie Angle – 71 degrees
• Stock Grip – Custom Winn ProX 1.18
• Length – Measured from center of leading edge
• Balance – 5 degrees toe down
• Shaft – FST stepless, .370” tip
• Shafting – Single bend mounted directly into the head

ER6 iRoll-B – an extreme center mass weighted deep mallet.
• CNC Milled in Carlsbad, California USA
• Head Material – Black anodized 6061 aluminum, 303 stainless steel rear-center weight
• Shaft Lengths & Head Weights– 35’@355g, 34”@370g, 33”@385g
• Face Loft – 2 degrees from the shaft
• Lie Angle – 70 degrees
• Stock Grip – Custom EVNROLL non-taper 1.2
• Length – Measured from center of leading edge to butt
• Balance – 12 degrees toe down
• Shaft – FST stepless, .370” tip
• Shafting – Single bend mounted directly into the head

ER6 iRoll-B – an extreme center mass weighted deep mallet.
• CNC Milled in Carlsbad, California USA
• Head Material – Black anodized 6061 aluminum, 303 stainless steel rear-center weight
• Shaft Lengths & Head Weights– 35’@355g, 34”@370g, 33”@385g
• Face Loft – 2 degrees from the shaft
• Lie Angle – 70 degrees
• Stock Grip – Custom EVNROLL non-taper 1.2
• Length – Measured from center of leading edge to butt
• Balance – 12 degrees toe down
• Shaft – FST stepless, .370” tip
• Shafting – Single bend mounted directly into the head

ER7 FullMallet – a rear perimeter weighted full mallet.
• CNC Milled in Carlsbad, California USA
• Head Material – 303 stainless steel
• Color – Silver satin finish
• Shaft Lengths & Head Weights– 35’@355g, 34”@370g, 33”@385g
• Face Loft – 2 degrees from the shaft
• Lie Angle – 70 degrees
• Stock Grip – Custom EVNROLL non-taper 1.2
• Length – Measured from center of leading edge to butt
• Balance – 23 degrees toe down
• Shaft – FST stepless, .370” tip
• Shafting – Single bend mounted directly into the head

ER8 TourMallet – a classic mid-sized players mallet.
• CNC Milled in Carlsbad, California USA
• Head Material – 303 stainless steel
• Color – Silver satin finish
• Shaft Lengths & Head Weights– 35’@355g, 34”@370g, 33”@385g
• Face Loft – 2 degrees from the shaft
• Lie Angle – 70 degrees
• Stock Grip – Custom EVNROLL non-taper 1.2
• Length – Measured from center of leading edge to butt
• Balance – 23 degrees toe down
• Shaft – FST stepless, .370” tip
• Shafting – Single bend mounted directly into the head

商品番号:EVN0001 商品名:Evnroll Putters
戻る